The browser displays 3D body scans from the CAESAR anthropometric survey (US, Italy and Netherlands), with their anatomical landmarks and measurements. It reads scans straight from your disk: nothing is uploaded.
When the page opens it loads the built-in sample set (60 scans) into Multi mode with the Cube layout and fog turned on. The bodies appear one after another as they download. Use Clear scene and Clear to start fresh with your own folders.
CAESARall/data, for example a2.scans/*.ply.gz (original scanner files), gltf/*.glb (converted files), and the matching landmarks/*.lnd files.Folders add up: choose a2, then b2, then a2/gltf, and all of them appear in one list. Add files… adds individual files, and you can also drag files onto the 3D view. Clear empties the list and removes every body from the scene.
a folders hold standing scans, b seated, c a second seated pose. Picking a folder's parent (e.g. a2) gives you both its PLY and GLB files; picking a2/gltf gives just the GLBs. A browser can only read inside the folder you pick, so files in parent folders are not seen. The measurement data is built in, so you don't need them.030 or nl_.One body at a time. Click a list entry, or use ◀ Prev Next ▶ or ↑ ↓ to step through the list. The header shows vertex and triangle counts, the scan height, the subject's sex and the values of the three selected measurements.
Many bodies at once (up to 200). Clicking a list entry adds that body to the scene; clicking it again removes it. Bodies in the scene are highlighted in the list. Every body is turned to face the front, using its landmarks, and has a name tag underneath.
| Layout | Arrangement |
|---|---|
| Wall | A grid of rows stacked upward and columns side by side, starting top-left. The number of columns follows the window's shape. |
| Cube | A 3D lattice with equal spacing in all three directions (27 bodies → 3×3×3). The camera starts at a three-quarter view from above. Fly inside with WASD. Cube outline: On / Off shows or hides a gray wireframe of the cube the bodies sit in. Fog helps show depth here. |
| Line | One horizontal row. Each body gets exactly its own width plus a 15 cm gap, so neighbors never touch. |
Two bodies, A and B, for side-by-side or overlaid comparison.
W/S forward and back · A/D left and right · E/Q up and down · hold Shift for 3× speed. The rotation point moves with you, so after flying somewhere the mouse rotates around your new position. Speed scales with the size of the scene.
| Scan color Shaded Wire | Show the scanner's own color, plain gray shading, or the triangle mesh. |
| Front Side Back Top | Standard views, lined up with the direction the body faces. |
| Auto-rotate | Slowly spin the view. |
| Fit all | Reframe the camera on everything in the scene. |
| Fog + slider | Fade farther bodies into the background (distance fog). The slider sets the strength; the fog follows the camera, so whatever is nearest stays clear. |
| Names | Show or hide the file-name tags under the bodies (Multi and Compare). |
| – / + | Collapse or expand the control panel. |
Landmarks are the anatomical points marked on each scan (about 73 for standing scans), drawn as small spheres colored by body region:
Head & neck Torso Arms & hands Legs & feet Crotch (a computed point between the legs, not on the surface)
Pick up to two measurements from the Tape measures menus in the left panel, above the measurement filters. Tape 1 is drawn in yellow and tape 2 in blue, both with inch marks, on every body in the scene, as described in the CAESAR Final Report, Vol. II: Demographic and Measurement Descriptions (Air Force Research Laboratory, 2002):
The readout and labels give the table value (measured by hand) and, where the scan allows, the length of the tape on the scan. They differ because the scan posture is not the measuring posture (for example, arm lengths were taken with the arm bent and the fist on the hip). Seated measures appear only on seated (b/c) scans and standing measures only on standing (a) scans. Weight, skinfolds and thumb-tip reach are not drawn.
In Multi mode the tapes are drawn on every body, a few per frame, so they appear one after another in a large scene. Labels on the bodies are shown only when there are 12 or fewer.
A card at the bottom right shows the report's description, method, instrument, ISO 7250 reference and line drawing for the chosen measurement, with its page number. With two tapes on, tabs switch between them. Use – on the card to fold it.
All / Male / Female radio buttons.
Each slot has a checkbox (on/off), a dropdown of the 45 traditional measurements, and Min/Max sliders showing inches and cm (pounds and kg for weight). Choosing a measurement resets its sliders to that measure's full range. The defaults are Stature, Weight and Chest Circumference.
Heights: stature, crotch, knee, waist (preferred), hip-max; sitting height, eye, acromial and elbow height sitting. Lengths: arm (spine–wrist, shoulder–wrist, shoulder–elbow), spine–shoulder, spine–elbow, buttock–knee, waist front, total crotch, foot, hand; thumb-tip reach and three trials. Breadths: shoulder, hip sitting, head, bizygomatic. Circumferences: chest, under-bust, chest girth at scye, armscye, waist, hip max, thigh, thigh max sitting, neck base, ankle, hand, head, vertical trunk. Also head length, face length, subscapular and triceps skinfolds, and weight.
MeasurementsEnglish file, its values replace the built-in ones. Seated (b) and second-seated (c) scans use the same subject's measurements. Under-bust circumference is blank for most men.| Input | Action |
|---|---|
| Drag · scroll · right-drag | Rotate · zoom · pan |
| WASD · QE · Shift | Fly · down/up · faster |
| ↑ ↓ | Previous / next scan (Single mode) |
| Click list entry | Show (Single) · add/remove (Multi) · put in A or B (Compare) |
| Shift-click list entry | Add or remove the whole range, following the first-clicked scan (Multi) |
| Hover / click landmark | Show name / pin or unpin its label on every body |
Keys are ignored while you are typing in the filter box.
csr0250a is US/Italy subject 250, pose a (standing); b and c are seated poses. nl_1001a is Dutch subject 1001..ply.gz): the original scanner meshes, about 150–190 thousand vertices with per-vertex color, in meters with Z pointing up. The browser stands them upright with the feet on the floor..lnd): columns 5–7 are x, y, z in millimeters in the scan's own coordinates. Landmarks marked missing (-999) are skipped.gltf/*.glb): converted from the PLY scans. Meters, rotated to the glTF convention (Y up), vertex colors and normals, with the landmarks stored inside as named points in a landmarks group. They open in Blender and other glTF viewers.landmarks/ (e.g. pick a2 rather than a2/scans), or use the GLB version.gltf folders there.